Simulation Transportation ISTA Packaging Testing With LCD Display Controller
Products Introduction:
LCD Display Controller Simulation Transportation ISTA Packaging Free Drop Testing Machine is used to test the damage degree when the package is dropped, and test the impact resistance of the package during transportation, for example, to test the surface, edge and angle of the package through free-drop method.
Main Parameters:
| Dropping height | 300mm-1500mm( can be adjustable) |
| Display method: | digital display |
| Maximum weight of the package | 60kg |
| Maximum size of the package | (L×W×H) 1000×700×1000mm |
| Size of the dropping panel | (L×W)1700×1400mm |
| Size of the swing | 200×150×8mm |
| Dropping deviation | ±10mm |
| Deviation of dropping horizon | less than 1° |
| Outside size: (L×W×H) | 1700×1200×2500mm |
| Chamber size: (L×W×H) | 350×350×1100mm |
| Weight | 550kg |
| Power | AC single phase, 220V |
| Test standards | GB/T4857.5, ISO 2248,JIS Z0202,ASTM D5276 |
| Accessories | electric wire 1 piece, guarantee certificate 1 piece, operational manual 1 piece |
Operation of Control:
A. LCD Display Controller ISTA Packaging Free Drop Testing Machine adopts electromagnet control system to control the dropping swing.
B. It has automatic return function, electric dropping and electro-motion rising device and dropping test function
C. The testing height can be digital set up.
The Comparison Table of The Package Weight And Dropping Height:
| Weight | Height |
| No less than | Less than | Free-drop |
| Lbs | Kg | Lbs | Kg | Inch | mm |
| 0 | 0 | 21 | 10 | 30 | 760 |
| 21 | 10 | 41 | 19 | 24 | 610 |
| 41 | 19 | 61 | 28 | 18 | 460 |
| 61 | 28 | 100 | 45 | 12 | 310 |
| 100 | 45 | 150 | 68 | 8 | 200 |
Configuration:
1, Outside material: advanced paint coat
2, Display: LCD display
3, Power system: drive device (imported motor + speed reducer +Axel+ upper and lower limitation + spring +electromagnet)+ dropping device(dropping standard board +magnet + safety spacing push rod + automatic return back + digital alto-meter +encoder + hydraulic pressure buffering device)
4, Control system: adopting electromagnet sensor control, the interface is easy to operate, high degree automatic control
5, Safety device: upper and lower limitation device, automatic off-power device if electricity leakage occurs
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
Product Tags:
|
|
Simulation Transportation ISTA Packaging Testing With LCD Display Controller Images
|
